< WORLDWIDE DELIVERY >

Log In  |Sign Up

CALL US:0086-318-7061761

Drop In Cast Iron Bathtub
YOU MIGHT BE ALSO INTERESTED IN

NH-023 Double Ended Drop In Bathtub, Continuous Flat Top Finish

     This bathtub is finished with a continuous flat top, and tub interior is vitreous enameled
     This process varies in the amount of time it takes to complete due to the size of the bath and thickness of the enamel. The bath is then (ground coated) this is like an undercoat which is sprayed on to the bath and force dried before being placed into the furnace for its first of approximately four firings at a temperature in excess of 800 degrees Celsius. After 30-50 minutes, the bath is taken out of the furnace and allowed to cool. Then it is stoned down to try and smooth the surface of the newly fired ground coat so it is ready for its  of 3-4 applications of (cover coat) this is the actual enamel that when fired in the furnace it gives you the white shiny surface.
     Cast Iron Construction and White Enameled
     Double Ended drop-in or under-mount installation options allows the customer to choose what suites their needs. 
     A textured slip-resistant bottom is available to take the worry out of slipping and sliding as you move about the tub.
     Three dimensions are supplied currently and a bespoken design service can be offered according to customer’s special requirement. 
     Hot selling model on stars hotel & apartment building demand. 
    MADE IN CHINA
     
    PRODUCTS BENEFITS
    Southsea Bath’s enameled Cast-Iron combines the strength, durability, and insulation benefits of cast-iron with the scratch, chip, and burn resistance of a baked, powder coat finish and comes with an exceptional long time Limited Warranty. When these materials are combined it gives the sink or tub the strength to last a  long time of use. Constructed of durable Cast Iron which provides incomparable water temperature retention. Product Meets or Exceeds the Following Codes and Standards: ASME.
     
     Item Number: NH-023
     Item Dimension and Weight: 
       1600 x 700 x 430MM; (119kgs)
       1700 x 750 x 430MM; (127kgs)
       1800 x 840 x 480MM; (195kgs)
     Color: White
     Style: Drop In, Soaking
     Material: Southsea Cast Iron
     Installation Method: Drop In or Undermount
     Drain Location: Center
     Package Quantity: 6-8pcs/wooden pallet

    PACKAGE SAMPLE
     
     Overall Length: 1600/1700/1800MM (measured from left to right point on outer rim)
     Overall Width: 700/750/840MM (measured from back to front point on outer rim)
     Overall Height: 430/480MM (measured from the top of tub rim to the bottom of drain hole)

    CAD DRAFT

        


     
    NOTE: 
    Tub dimensions may vary +/- 10 mm and are subject to change. For better results, Southsea Bath recommends that Cast iron baths are heavy, please wear appropriate safety equipment when moving and installing these products. Southsea Bath assumes no responsibility for improper package disassembly and rough-in installation.
     Tap Hole: Without in general, but it is available to be with.
     Bathtub Grip: Without
     Bath Drain: NH-T502
     Slip-resistant Pattern: Available with or without
     Bath Pillow: Available with or without
     Bath Mat: Available with or without



Scan QR code to pay attention to southsea baths

ANPING NANHAI SANITARY WARE CO.,LTD 2015 | ALL RIGHTS RESERVED